About the TiFFCOFiO Outdoor heavy-duty timer, 2 ft cord
A heavy-duty mechanical outdoor timer with a 96-pin dial and two grounded outlets on a 2 ft cord.
Each pin is 15 minutes, twice as fine as a standard pin dial, which suits a filter pump that should run in several short stretches through the day. The 2 ft cord lets the timer hang clear of the outlet, and a pump drawing up to 15 A (1875 W) is within its rating. The ETL mark is on the case. The outdoor heavy-duty timer, 2 ft cord is one of 41 models in the TiFFCOFiO range.
Specifications
| Type | Outdoor mechanical timer |
|---|---|
| Outlets | 2 grounded |
| Cord length | 2 ft |
| Rated load | 15 A, 1875 W |
| Listing mark | ETL |
| Price | $15.99 |
Questions
Questions about the TiFFCOFiO Outdoor heavy-duty timer, 2 ft cord
The TiFFCOFiO Outdoor heavy-duty timer, 2 ft cord is rated for 15 A, 1875 W in total, so the watts printed on everything you plug into it should add up to less than 1875 W. If a pump or a compressor runs from the outdoor heavy-duty timer, 2 ft cord, leave headroom: a motor pulls more than its running figure as it starts.
Turn the dial of the outdoor heavy-duty timer, 2 ft cord until the current time sits at the arrow, then push down a pin for every stretch of time you want the power on. The outdoor heavy-duty timer, 2 ft cord repeats that pattern every 24 hours until you move the pins.
The outdoor heavy-duty timer, 2 ft cord is made for outdoor use, with covers over the outlets. Keep the covers of the outdoor heavy-duty timer, 2 ft cord closed, point its outlets down or to the side, keep its plug off wet ground and plug it into a GFCI-protected outlet, as the U.S. Consumer Product Safety Commission advises for outdoor lights.
Outdoor timers
